| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Getaway Graphics starting to curl up around the edges http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=9532 |
Page 1 of 1 |
| Author: | c.bmartin [ Tue May 27, 2008 6:54 pm ] |
| Post subject: | Getaway Graphics starting to curl up around the edges |
Has anyone else experienced this problem with their hull graphics? Is there a solution to this without replacing the graphics? If not, are replacement graphics available for the 2004 model? Thanks, Barry Martin |
|
| Author: | mmiller [ Wed May 28, 2008 10:25 am ] |
| Post subject: | |
Graphics are available in the current colors. The graphics can peel off, but usually stick too hard to remove easily. |
|
| Author: | c.bmartin [ Thu May 29, 2008 7:31 pm ] |
| Post subject: | Graphics |
Thanks for the reply Matt. Does anyone know if it's possible to get the graphics to smooth down again? Thanks, Barry Martin |
|
| Author: | mmiller [ Fri May 30, 2008 9:08 am ] |
| Post subject: | |
I would try some contact cement. |
|
| Author: | fhopper [ Wed Jul 16, 2008 2:26 pm ] |
| Post subject: | |
I would just as soon take my factory decals off. Do the rotomolded hulls require decals with adhesive or will the slide on type used on fiberglass work? If I choose to paint should I look for any special types of paint that would adhere better than others? |
|
| Author: | Sail Revolution [ Wed Jul 16, 2008 4:44 pm ] |
| Post subject: | Re: Graphics |
c.bmartin wrote: Thanks for the reply Matt. Does anyone know if it's possible to get the graphics to smooth down again?
Thanks, Barry Martin Try lightly heating the sticker with a blow drier and sticking it down. I had marginal luck with it. |
|
| Author: | c.bmartin [ Mon Aug 25, 2008 3:34 am ] |
| Post subject: | Boat Graphics |
Matt, You mentioned that current graphics are available. Is the 2004 graphic still currently used? The boats I've seen that are newer have a different scheme for their graphics. If they are available, please provide a part number as I think I want to order a set before they're no longer available. Thanks, Barry Martin |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|