| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| trailer specs http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=9541 |
Page 1 of 1 |
| Author: | sail.fast24 [ Wed May 28, 2008 6:41 pm ] |
| Post subject: | trailer specs |
Does anyone know what the recomended distance is between the two trailer cross bars that hold the hulls? The distance front-to-back from roller to roller is about five feet. Is this correct? It just looks goofy, like they should be spread out more. I dont want to damage the hulls trailering. Thanks |
|
| Author: | Jbernier [ Thu May 29, 2008 9:25 am ] |
| Post subject: | |
I don't have a trailer to look at...but I do know that you can't spread them too far because the keel cut-out near the transom. You should just look at the boat while it is sitting on the trailer to see that its positioned correctly. |
|
| Author: | The Dog [ Thu May 29, 2008 11:06 am ] |
| Post subject: | |
Our 16/Getaway trailers have the front and back cross bars set about 6'3" apart. Not had any troubles with that. Brian C |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|