The mainsail cleat cracked on my wave.
It appears to be riveted to the mast. Any suggestions as to how I can replace it?Thanks
Regina
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| broken cleat http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=14220 |
Page 1 of 1 |
| Author: | regina [ Mon Aug 31, 2009 11:18 am ] |
| Post subject: | broken cleat |
The mainsail cleat cracked on my wave. It appears to be riveted to the mast. Any suggestions as to how I can replace it?Thanks Regina |
|
| Author: | mmiller [ Mon Aug 31, 2009 11:43 am ] |
| Post subject: | Re: broken cleat |
Requires a sharp 3/16" drill bit. Drill off the rivet heads and punch the rivets into the mast. Replace with stainless rivets. Did a forum search for "rivet tool" http://www.hobiecat.com/community/viewtopic.php?f=9&t=10799&hilit=rivet+tool |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|