| Hobie Forums http://www.hobie.com/au/en/forums/ | |
| Vinyl lettering/decals http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=35420 | Page 1 of 1 | 
| Author: | RobDek [ Sun May 08, 2011 12:05 pm ] | 
| Post subject: | Vinyl lettering/decals | 
| Will vinyl lettering/decals stay stuck on the plastic hull? Before spending money, I want to make sure the boat name will remain secure. | |
| Author: | cooldudecaptain [ Sun May 08, 2011 5:50 pm ] | 
| Post subject: | Re: Vinyl lettering/decals | 
| I used a company called sailing graphics. They made both the boat registration numbers and a boat logo (image) about 2 years ago. They have stayed in place on both salt and fresh water without any problems, peeling, etc. Reasonably priced too. contact: http://sailing-graphics.com bill | |
| Author: | mj [ Mon May 09, 2011 11:46 am ] | 
| Post subject: | Re: Vinyl lettering/decals | 
| I have used a local print shop to make registration numbers. I cleaned area before applying them, and they have stood up through three years of wear. No problems! | |
| Author: | mocowgirl [ Tue May 10, 2011 7:08 pm ] | 
| Post subject: | Re: Vinyl lettering/decals | 
| I purchased lettering at the local boat store and I had no problems with it staying on the boat in the 3 years I owned it. | |
| Author: | RobDek [ Wed May 11, 2011 11:12 am ] | 
| Post subject: | Re: Vinyl lettering/decals | 
| OK...thanks for the info. Good to know that decals will remain secure on polyethylene hulls. | |
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] | 
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ | |