Hobie Forums
http://www.hobie.com/au/en/forums/

Looking for part name/# - 2 little plugs on side of hull
http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=58746		 Page 1 of 1
Author:  Novacaine [ Wed Aug 10, 2016 10:21 am ]
Post subject:  Looking for part name/# - 2 little plugs on side of hull
There are two little plugs on the outside of each hull. One of the plugs is missing on my wave. It looks like it covers a little screw hole. Can anyone point me where to get a replacement or what the part is? I don't see it in the parts diagram. Thanks.
Author:  mmiller [ Wed Aug 10, 2016 11:15 am ]
Post subject:  Re: Looking for part name/# - 2 little plugs on side of hull
38120031 NYLON PUSH-IN PANEL RIVET

Image
Author:  Novacaine [ Wed Aug 10, 2016 1:22 pm ]
Post subject:  Re: Looking for part name/# - 2 little plugs on side of hull
Thanks, Matt!
Author:  tradisrad [ Wed Aug 10, 2016 3:19 pm ]
Post subject:  Re: Looking for part name/# - 2 little plugs on side of hull
I suppose you could also put a screw in the inserts. They wont get knocked out.
Author:  Norm742 [ Sun Aug 14, 2016 1:14 pm ]
Post subject:  Re: Looking for part name/# - 2 little plugs on side of hull
Machine screw size is 1/4-20.
Author:  mmiller [ Mon Aug 15, 2016 2:02 pm ]
Post subject:  Re: Looking for part name/# - 2 little plugs on side of hull
Yes...

8030331 SCREW 1/4-20 X 5/8 PHMS-P SS

The plastic panel rivets are cheaper. Not sure about depth without the hardware (chain plate) thickness. The hole is not clear through.
Author:  leecea [ Mon Aug 15, 2016 7:21 pm ]
Post subject:  Re: Looking for part name/# - 2 little plugs on side of hull
Quote:
The hole is not clear through


Ah... that's what I wanted to know. I have missing caps too and was worried about water entry so filled the holes with silicone. Waste of time, I guess :)
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/