| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Seperate part #s for jib install hardware? http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=61030 |
Page 1 of 1 |
| Author: | leecea [ Wed Jul 12, 2017 9:59 am ] |
| Post subject: | Seperate part #s for jib install hardware? |
Since I already have the spreader bar, is there a list of the other part #s I'd need for the jib install? The only part # I can find is for the whole kit - bar and hardware - which I don't need. Thanks, Andy |
|
| Author: | mmiller [ Wed Jul 12, 2017 10:25 am ] |
| Post subject: | Re: Seperate part #s for jib install hardware? |
COMPONENT NUMBER QTY PER BILL DESCRIPTION B O M COMPONENT TYPE 10730000 1.00 CLEAT-MAST R 20810011 1.00 WIRE FORESTAY H16 UPR 20810011 S 3103 1.00 BLOCK, MINI W/AXLE 3103 S 38120041 2.00 TANG HW BOW SPREADER R 38760041 2.00 CAM CLEAT PLT-CLUB/SE R 38999021 1.00 BOW SPREADER - WAVE 38999021 S 50017 2.00 SWIVEL CAM CLEAT R 8030111 2.00 SCREW 10-32 X 1 PHMS-P SS R 8030331 4.00 SCREW 1/4-20 X 5/8 PHMS-P SS R 8031211 6.00 SCREW 8-32 X 5/8 FHMS-P SS R 8050811 6.00 NUT 8-32 NYLOCK LO-PRO SS R 8051301 2.00 NUT 10-32 SQUARE SS R 92870000 1.00 SHACKLE HEADBOARD 3/16 R RM014RED 27.00 LINE 1/4" SPUN DACRON - RED R RX316WHT 27.00 LINE 3/16 STA-SET X POLY R |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|