Hobie Forums
http://www.hobie.com/au/en/forums/

Bridle Eyestrap Anchor
http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=62544		 Page 1 of 1
Author:  Gibbsak [ Sat Apr 21, 2018 4:04 pm ]
Post subject:  Bridle Eyestrap Anchor
While replacing a bridle eyestrap, the bolt has been epoxy set into the anchor, and I ended up breaking the bolt in the anchor.

While trying to drill out the bolt, the bit snapped. It is taking forever to drill out and try to re-tap.

Is there an easier way?

Image
Image
Author:  Gibbsak [ Tue Jul 03, 2018 9:09 pm ]
Post subject:  Re: Bridle Eyestrap Anchor
[url]https://photos.app.goo.gl/yY4uJPYXGS9aXas99
[/url]
Author:  mmiller [ Fri Jul 06, 2018 10:06 am ]
Post subject:  Re: Bridle Eyestrap Anchor
Image

That would require something different to fix.

Maybe bolts through the hull from side to side below the insert to mounts a bale or strap to hang the bridle on.

Image

This is the idea, but since one bolt is sheared. Mount a strap up a bit to hook the bridle direct.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/