| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Cam kit for '96 Wave http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=63130 |
Page 1 of 1 |
| Author: | HutchCanada [ Sun Jul 08, 2018 2:13 pm ] |
| Post subject: | Cam kit for '96 Wave |
Broke a cam. Need a replacement. I ordered the 5302 kit but now I think its the wrong kit. I think the 5302 is the kit for the H14? I read somewhere that the cams on the wave and the H14 are the same. Will I be still be able to use? Also, any reason to replace the springs and plungers mine look in perfect condition Sent from my SM-G930W8 using Tapatalk |
|
| Author: | mmiller [ Tue Jul 10, 2018 7:56 am ] |
| Post subject: | Re: Cam kit for '96 Wave |
The Wave used the same castings as the H17/18/20 5204 RUDDER CAM KIT H17/18/20 |
|
| Author: | HutchCanada [ Tue Jul 10, 2018 8:24 am ] |
| Post subject: | Re: Cam kit for '96 Wave |
That's what I thought. But does the H14 and the H17/18/20/Wave share the same cams/screws? Sent from my SM-G930W8 using Tapatalk |
|
| Author: | mmiller [ Tue Jul 10, 2018 8:27 am ] |
| Post subject: | Re: Cam kit for '96 Wave |
14 and 16 share... and are different from the 17/18/20 casting. |
|
| Author: | HutchCanada [ Tue Jul 10, 2018 8:44 am ] |
| Post subject: | Re: Cam kit for '96 Wave |
Ok good to know. I've ordered the 5202! Will send back and get the 5204. Thanks for the clarification Sent from my SM-G930W8 using Tapatalk |
|
| Author: | HutchCanada [ Sun Jul 15, 2018 11:14 am ] |
| Post subject: | Re: Cam kit for '96 Wave |
Kit 5204. Perfect. Drilled out old pins, popped the new cams in with the sister screws. Cleaned and greased the old plungers and springs. Everything works great now Sent from my SM-G930W8 using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|