| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| DIY tiller tendon Wave http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=70600 |
Page 1 of 1 |
| Author: | HobieDiver [ Wed Feb 22, 2023 11:49 am ] |
| Post subject: | DIY tiller tendon Wave |
Hello Everyone! I was wondering if anyone who is handy, and it seems many of you are, have a DIY tiller joint tendon solution. It seems like it is just a piece of tubing filled with something. If anyone has ideas please let me know. Thank you. |
|
| Author: | mmiller [ Thu Feb 23, 2023 9:45 am ] |
| Post subject: | Re: DIY tiller tendon Wave |
The tendon is two diameters of fiber reinforced tubing. One inside the other. |
|
| Author: | HobieDiver [ Wed Mar 08, 2023 8:25 am ] |
| Post subject: | Re: DIY tiller tendon Wave |
Do you have instructions on how to make it? Tube sizes and a compound so I can secure the screws? Apologies if it is a stupid request! |
|
| Author: | drb9 [ Mon Aug 05, 2024 8:14 am ] |
| Post subject: | Re: DIY tiller tendon Wave |
Reviving this topic. We just did this repair. We used black 7/8" OD x 5/8" ID hose, with a red 5/8" OD x 3/8" ID hose inserted for stiffness. I'm not sure how to share pictures, but here is a Google Doc link. https://docs.google.com/document/d/1x5OEKJY4k9WFXeOH741uOhvwbIcHWKlrDLmu3fZTUlk/edit?usp=sharing |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|