| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Moldy/Mildewy Trampoline http://www.hobie.com/au/en/forums/viewtopic.php?f=24&t=8645 |
Page 1 of 1 |
| Author: | zojoe [ Tue Jan 22, 2008 8:23 am ] |
| Post subject: | Moldy/Mildewy Trampoline |
I've had a tarp over my Wave this winter but when I removed it I noticed a lot of mildew/mold on the tramp . What can I safely use to remove the mold/mildew? Would bleach ruin the Tramp? It is a new Hobie tramp not secondary market tramp. Thanks, Joe |
|
| Author: | The Dog [ Tue Jan 22, 2008 9:56 am ] |
| Post subject: | |
Bleach will even eat stainless steel given enough time. Try Lysol All Purpose or Clorox Clean-Up with a stiff brush. Both work good. We use the Lysol here at the shop. Just don't leave them on the tramp for hours and hours. Brian C |
|
| Author: | mmiller [ Tue Jan 22, 2008 9:57 am ] |
| Post subject: | Scrub |
I think you could start with a soft scrub with bleach without problem. We commonly use scrubbing powder (ajax) with bleach. |
|
| Author: | dolfnfan [ Thu Apr 17, 2008 2:11 pm ] |
| Post subject: | |
I know this thread is a bit old but thought I'd throw another idea out there: pressure washer. I've used a 2460psi washer with the nozzle set to fan the water out over a broad area so as to greatly reduce the force of the water. There's plenty of force to blast off the mildew/grime/cobwebs/algae but not nearly enough to damage anything. It was gentle enough that I could blast my own foot with no pain. It took about 2 minutes and the tramp looked showroom new when I was done. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|