| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| fish finder on my revo ??? http://www.hobie.com/au/en/forums/viewtopic.php?f=26&t=13941 |
Page 1 of 2 |
| Author: | Borg [ Fri Aug 21, 2009 3:06 pm ] |
| Post subject: | fish finder on my revo ??? |
Hi , i just purchased a lowrance m68c gps sonar in color....i also purchased a hobie fishfinder installation kit. Heres a few questions for you all. 1) where do i install the transducer?...should i goop it in front of the sail mount? 2) the transducer, which direction should it be pointing?...i am going to use the transom transducer that came in the box. 3) this being my first time installing an transducer with goop, could i simply just duct tape it to the bottom of the hull? any more tips and ideas are welcomed. borg |
|
| Author: | Ron Papworth [ Fri Aug 21, 2009 5:36 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
look for the post "ram mount for sail mast opening" before you install the transducer. If you decide to install it with the goop as instructed...be certain to work the transducer around in the goop to push all the airbubbles out from under it. I think in my install, I didn't get them out and the ff doesn't show fish like I had hoped. As I said, look for that post above and look at all the pic's that are there, then decide how you are going to install the TD. |
|
| Author: | Coosbay [ Sun Aug 23, 2009 1:33 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
Same kayak,same ff.. I first mounted trans in back of mast tube,, poor return. Maybe to thick of hull section there as it is heavy around the drive and mast area. Moved it just behind the seat supports, works great now.. If it wasn't a colour machine you would'nt notice the defference, just add more gain to make up for the loss, (20 %).. The colour return looks like it does in silty water when mounted in front..thicker sections( goes to black and white wash out ) Royg |
|
| Author: | Ron Papworth [ Sun Aug 23, 2009 7:37 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
Coosbay...did you install the td behind the mast with the goop? If so how did you remove it to move it back aft? I think maybe mine could use some moving...just don't know if it can be done now that I gooped it in. |
|
| Author: | MPromnitz [ Mon Aug 24, 2009 10:16 am ] |
| Post subject: | Re: fish finder on my revo ??? |
Here is a link to a video that runs you through the entire fish finder installation process: http://www.hobiecat.com/kayaking/access ... video.html This shows mounting the monitor on the rail, but you can mount it through the sail mount using the accessory tube wedge mount if you wish. |
|
| Author: | Coosbay [ Tue Aug 25, 2009 5:08 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
Ron Papworth wrote: Coosbay...did you install the td behind the mast with the goop? If so how did you remove it to move it back aft? I think maybe mine could use some moving...just don't know if it can be done now that I gooped it in. Work the edges up,,once you get the goop edge up enough to get hold of pull it off the kayak. Be carefull not to pull on the wireing.. If you did a good job and theres no edge to get hold of pull/pry the trans up,, give it time to strecth and release.. Check when you get it off to see if any bubbles were under the trans..Royg |
|
| Author: | Ron Papworth [ Sun Aug 30, 2009 7:10 am ] |
| Post subject: | Re: fish finder on my revo ??? |
Thanks Coos...I'll give your suggestion a try. |
|
| Author: | GeorgeD [ Sun Aug 30, 2009 7:50 am ] |
| Post subject: | Re: fish finder on my revo ??? |
I have mounted many behind the sail mast without any problems. At our shop we do not goop the transducers in. We cut the foam block smaller than the transducer on the top and wider on the bottom, goop it to the hull. When using pour a little water into the foam block insert the transducer. |
|
| Author: | Coosbay [ Sun Aug 30, 2009 12:15 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
GeorgeD ,, That would cure any bad goop jobs and de-lam problems,, Royg |
|
| Author: | NH Explorer [ Sun Aug 30, 2009 1:47 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
I have never had a problem using GeorgeD's method of mounting and recommend it to anyone who asks. I don't live in as warm a climate as many and get away with using vasaline instead of the water and it lasts for more than a seoson that way. I also mount directly behing the mast in the Revo and PA without any problems. |
|
| Author: | GeorgeD [ Mon Aug 31, 2009 1:10 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
Hey Roger it was good to see you again in Salem, you guys did a great job! George |
|
| Author: | Ron Papworth [ Thu Sep 10, 2009 5:45 am ] |
| Post subject: | Re: fish finder on my revo ??? |
Ok on the install info, but lets talk about the images. I don't really see any good indication of fish..because of where I have fished (large reservoir) I mostly am looking for water depth, which helps me find where the fish probably are. However; it would be good to "know" there are fish there. How about some of you guys who use ff to give me some tutoring on what I am seeing on the screen. I am using the Lorance x50ds. I see lots of images, but no complete fish images. 
|
|
| Author: | NH Explorer [ Thu Sep 10, 2009 9:10 am ] |
| Post subject: | Re: fish finder on my revo ??? |
George, Sorry I missed this post.....It was good seeing you too. We had a heck of a turnout with more people than ever traveling a ways to get here. If my goal wasn't fishing (I don't get to the salt often enough) I think I could have spent the entire time visiting with people I only see once or twice a year. See you next year...hopefully Jamaica Bay too. |
|
| Author: | Coosbay [ Thu Sep 10, 2009 1:13 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
Ron Papworth wrote: Ok on the install info, but lets talk about the images. I don't really see any good indication of fish..because of where I have fished (large reservoir) I mostly am looking for water depth, which helps me find where the fish probably are. However; it would be good to "know" there are fish there. How about some of you guys who use ff to give me some tutoring on what I am seeing on the screen. I am using the Lorance x50ds. I see lots of images, but no complete fish images. When your drifting not moveing they will apeare as straight lines ,, not arches. How much gain you have on makes a difference , to much gain will show moss, leaves, .. Tune for a good solid bottom return. Royg |
|
| Author: | Coosbay [ Thu Sep 10, 2009 1:20 pm ] |
| Post subject: | Re: fish finder on my revo ??? |
Ron Papworth wrote: Ok on the install info, but lets talk about the images. I don't really see any good indication of fish..because of where I have fished (large reservoir) I mostly am looking for water depth, which helps me find where the fish probably are. However; it would be good to "know" there are fish there. How about some of you guys who use ff to give me some tutoring on what I am seeing on the screen. I am using the Lorance x50ds. I see lots of images, but no complete fish images. When your drifting not moving they will appear as straight lines ,, not arches. How much gain you have on makes a difference , to much gain will show moss, leaves, .. Tune for a good solid bottom return. Royg |
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|