Hobie Forums http://www.hobie.com/au/en/forums/ |
|
Livewell pump question http://www.hobie.com/au/en/forums/viewtopic.php?f=26&t=22549 |
Page 1 of 1 |
Author: | araz2114 [ Sat Mar 27, 2010 3:20 am ] |
Post subject: | Livewell pump question |
Hey guys a have a livewell pump question. I don't own one yet and my dealer doesn't have one in stock. I have watched the video but I can't see clearly. The video says that the livewell uses a Tsunami 500 pump. My question is.... is this a normal bilge pump or has it been modified? Does it have the base removed from it? Or does the whole pump fit into a pocket inside the livewell? Can the replacement Tsunami cartridge be installed if the pump dies? Thank you, Chris |
Author: | sammy925 [ Mon Mar 29, 2010 11:35 am ] |
Post subject: | Re: Livewell pump question |
try this and have a look. the whole thing can be removed easily. I'm sure a substitute pump could be fit with a lil work and some of the originals mounting parts. i have the HOBIE Live well and i have no problems with it. Also a trick you might want to try is to put a ballon cut on the end over the pump outlet/fill pipe to allow shutting the pump of without letting the water run out like a big drain. the balloon will collapse and clog the pipe preventing the water from running directly out. Takes a few trys to get the balloon hole the right size but it works ok for the most part. viewtopic.php?f=26&t=9383&p=48395&hilit=hobie+livewell+pump#p48395 http://www.jaxkayakfishing.com/phpBB/topic16212.html |
Author: | araz2114 [ Mon Mar 29, 2010 2:26 pm ] |
Post subject: | Re: Livewell pump question |
Thank you for the close up of the pump. It is threaded on the bottom... sweet! |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |