| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| How To Glue, Tape or Bond Aluminum Plate to HDPE? http://www.hobie.com/au/en/forums/viewtopic.php?f=26&t=58937 |
Page 1 of 1 |
| Author: | C4C [ Fri Aug 26, 2016 6:23 pm ] |
| Post subject: | How To Glue, Tape or Bond Aluminum Plate to HDPE? |
I am adding my very long Lowrance Structure Scan Transducer to the rear of my kayak. The transducer is already bolted to a 6061 T6 aluminum plate that form fits perfectly to my hull. Now all I need to do is permanently attach the plate to the hull WITHOUT using any bolts, screws or modifying my hull in any way. I am looking for permanent double sided tape, some sort of glue or any other methods that bonds to high density polyethylene. Any body have any idea? I don't want the transducer popping off every time a gator wraps a line around it. |
|
| Author: | coreboarder [ Wed Aug 31, 2016 8:07 am ] |
| Post subject: | Re: How To Glue, Tape or Bond Aluminum Plate to HDPE? |
you probably want to ask this in the kayak/fishing forums and not the sailing forums: viewforum.php?f=53 |
|
| Author: | tpdavis473 [ Wed Aug 31, 2016 9:39 am ] |
| Post subject: | Re: How To Glue, Tape or Bond Aluminum Plate to HDPE? |
HDPE is difficult to bond (a couple years ago I would have said impossible)...especially in a marine environment. Suggest you Google HDPE glue and pick one of the new products...but I'd add a safety line to the aluminum just in case. |
|
| Author: | HStrech [ Thu Sep 01, 2016 3:32 pm ] |
| Post subject: | Re: How To Glue, Tape or Bond Aluminum Plate to HDPE? |
Have you considered one of the RAM transducer arm mounts for LSS1 & 2 (part no. 72023037)? This arm mount is specifically suited for the StructureScan, and would only require drilling to thru-bolt the RAM ball base to the gunnel of your kayak. Takes 1" RAM Ball. |
|
| Author: | fusioneng [ Fri Sep 02, 2016 12:24 pm ] |
| Post subject: | Re: How To Glue, Tape or Bond Aluminum Plate to HDPE? |
I would think hdpe would be invisible to your sonar head, just wondering if you can glue to the inside. Just a thought FE |
|
| Author: | srm [ Wed Sep 07, 2016 2:22 am ] |
| Post subject: | Re: How To Glue, Tape or Bond Aluminum Plate to HDPE? |
Check out 3M VHB double-sided tape. http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ sm |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|