If it is a more recent model, the fittings (round) are threaded-in and can be easily removed and customized to your personal desire. You can use bungee ends, pay eye or cleat type connectors.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hobie Tankwell fixtures http://www.hobie.com/au/en/forums/viewtopic.php?f=26&t=7402 |
Page 1 of 1 |
| Author: | Joe11 [ Wed Jul 25, 2007 4:29 pm ] |
| Post subject: | Hobie Tankwell fixtures |
Another question. The fixtures around the tankwell of my Big A are different than on my other kayak. The fixtures are strictly for the bungee that criss crosses over the tankwell and does not have any place that is obvious to me to secure a milk crate or bait tank. Suggestions? Drill and install? |
|
| Author: | mmiller [ Thu Jul 26, 2007 11:37 am ] |
| Post subject: | Fittings |
If it is a more recent model, the fittings (round) are threaded-in and can be easily removed and customized to your personal desire. You can use bungee ends, pay eye or cleat type connectors.
|
|
| Author: | Joe11 [ Thu Jul 26, 2007 4:26 pm ] |
| Post subject: | |
I have a 2006 model. The tankwell has the fittings labled cleats on your post. Those things back out and can be replaced with the padeye's? Since I have only had it out once I am not as intimate with it as my other ride. |
|
| Author: | mmiller [ Mon Jul 30, 2007 1:19 pm ] |
| Post subject: | Can be replaced? |
Can be replaced... Yes... If the look thike these, they are threaded-in. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|