| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| epos http://www.hobie.com/au/en/forums/viewtopic.php?f=4&t=2152 |
Page 1 of 1 |
| Author: | petey [ Mon Aug 01, 2005 5:26 pm ] |
| Post subject: | epos |
is there any information on the pros and cons for each type of epo? there must be other differences, otherwise why make three? any feedback? |
|
| Author: | MBounds [ Tue Aug 02, 2005 7:43 am ] |
| Post subject: | |
Basically, the white blades make it easy to see kelp or weeds on the blade and they are less expensive. The carbon / carbon-kevlar ones are lighter and stiffer (and look cooler). However, they must be protected from the sun (they will bubble from the heat). |
|
| Author: | mmiller [ Tue Aug 02, 2005 9:30 am ] |
| Post subject: | Bubbles... |
Bubbles... are an effect of bad core material too. We have addressed that by changing the core. |
|
| Author: | Dan Ward [ Sun Aug 07, 2005 10:43 am ] |
| Post subject: | |
I have a set of the carbon EPO s. I noticed a few bumps on the surface. You can see them if you looks at the blade at a angle and can feel them when rubbing your hand across the blade. Is that what you mean by bubbles? I aways keep them covered. Just looked at them again definately just minor surface imperfections. They are so shiny and black everything shows up. |
|
| Author: | thomasc [ Sun Dec 17, 2006 11:04 pm ] |
| Post subject: | |
Sorry to bring up an old post, but is the bubbling that happens in the core protected by warrantee? |
|
| Author: | mmiller [ Mon Dec 18, 2006 3:06 pm ] |
| Post subject: | Warranty |
Yes, Warranty on parts is 1 year and would cover delamination / bubbles. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|