Hobie Forums http://www.hobie.com/au/en/forums/ |
|
Mounting a wind vane on the Bravo http://www.hobie.com/au/en/forums/viewtopic.php?f=42&t=68311 |
Page 1 of 1 |
Author: | Romkul [ Sun May 09, 2021 10:16 am ] |
Post subject: | Mounting a wind vane on the Bravo |
Does anyone have a DIY hack for mounting a wind vane on the Bravo’s mast float? Thanks. |
Author: | rpburton [ Mon Nov 15, 2021 9:15 am ] |
Post subject: | Re: Mounting a wind vane on the Bravo |
Neither the mast nor the mast float is practical for mounting a wind vane, since both rotate about the vertical axis of the mast during reefing and unfurling. However, a wind vane (such as the C-Vane wind vane) can be attached to the forward mast brace. Because the forward mast brace is only 0.88" in diameter a 1/2" thick sleeve needs to be placed inside the attachment bracket on the C-Vane wind vane. This sleeve can be held in place inside the attachment bracket by double-sided tape. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |