Hobie Forums
http://www.hobie.com/au/en/forums/

Can you identify this block\cleat?
http://www.hobie.com/au/en/forums/viewtopic.php?f=45&t=55705		 Page 1 of 1
Author:  ToddE [ Mon Aug 17, 2015 1:14 pm ]
Post subject:  Can you identify this block\cleat?
I have(had) two of these on the base of my mast. They attach to the mast track and are really sweet.
During my mishap we broke one, and I would like to order another. I would love it if one of you could tell me which part or where to buy it.
Thanks!
Image
https://drive.google.com/file/d/0B3a4nv5FsX1xQUVWV1FQMFRxOEU/view?usp=sharing
Author:  srm [ Mon Aug 17, 2015 1:53 pm ]
Post subject:  Re: Can you identify this block\cleat?
Harken pivoting exit block with 150 cam cleat. Murrays or APS would have it. A well stocked Hobie dealer might have one too.

If you're running a high tension application, I recommend getting the aluminum cam cleat. The line will eventually wear through a plastic cam.

sm
Author:  Bill 404 [ Mon Aug 17, 2015 2:03 pm ]
Post subject:  Re: Can you identify this block\cleat?
You will want to install a new one on the side of your mast so not to interfere with your main down haul, unless that is your down haul.

This new block will serve as your spinnaker halyard.
Author:  ToddE [ Mon Aug 17, 2015 2:21 pm ]
Post subject:  Re: Can you identify this block\cleat?
Thanks srm, that is of course the right answer! I have one on the way.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/