Hobie Forums
http://www.hobie.com/au/en/forums/

H21SE - Looking for Toggle on base of shroud. *PICS!
http://www.hobie.com/au/en/forums/viewtopic.php?f=45&t=64856		 Page 1 of 1
Author:  Darind514 [ Tue Jun 04, 2019 7:48 am ]
Post subject:  H21SE - Looking for Toggle on base of shroud. *PICS!
Hi everybody! Rigging inspection just prior to mast raising revealed these toggles at the base of the port & starboard shrouds are bent.

Toggle Hobie part #31830001.

Can't find these anywhere. Does anybody have a lead on where I can buy 3 of these toggles?

Thanks!

Darin
#005
Otter Tail Lake, MN

Image

Mast raising 2019! - Otter Tail Lake, MN.

Image
Author:  mmiller [ Tue Jun 04, 2019 8:56 am ]
Post subject:  Re: H21SE - Looking for Toggle on base of shroud.
Euro Marine was the supplier. Our system has some notes "714-1/4""

I think part 714 with 1/4" clevis holes. I could not find it on their site though.
Author:  Bill 404 [ Wed Jun 05, 2019 9:05 am ]
Post subject:  Re: H21SE - Looking for Toggle on base of shroud. *PICS!
Suncor Rigging Toggle
Pin Size: 1/4", Jaw Width: 0.26"
Working Load: 440 lbs
Material: 316 Stainless Steel
Item #: 608963006026 Brand:
Suncor Model #:
S0168-SS07

I found this part on the Defender Marine Outfitters site .

As I measured my part, the only difference seems to be that on the 21SE this toggle has a wider I.D. on the yoke measuring 5/16" and this Suncor part measures !/4" wide I.D.

Also the distance Hole to hole is 1.125" on my Hobie and Suncor stated this length at 1.01".....close enough? :?

Good luck.
Author:  Tom King [ Sun Jun 09, 2019 6:28 pm ]
Post subject:  Re: H21SE - Looking for Toggle on base of shroud. *PICS!
440 lbs. doesn't sound like a high enough working load to me.
Author:  benskiing [ Tue Sep 14, 2021 9:29 pm ]
Post subject:  Re: H21SE - Looking for Toggle on base of shroud. *PICS!
One

Here

https://www.ebay.com/itm/HOBIE-CAT-Twis ... 632-2357-0
Author:  Darind514 [ Tue Sep 14, 2021 9:37 pm ]
Post subject:  Re: H21SE - Looking for Toggle on base of shroud. *PICS!
HAHA! Good LUCK at that price. I can buy an entire parts boat for not more than that.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/