| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| i9s inflation sequence and pressure http://www.hobie.com/au/en/forums/viewtopic.php?f=47&t=13674 |
Page 1 of 1 |
| Author: | kayakfishermucho [ Tue Aug 11, 2009 6:54 pm ] |
| Post subject: | i9s inflation sequence and pressure |
Just traded for an i9s with no info. which chambers inflate first and what are the max. pressures---I have the hobie hand pump also the valve in front is different--why Thanks for any help---David |
|
| Author: | Jbernier [ Wed Aug 12, 2009 10:53 am ] |
| Post subject: | Re: i9s inflation sequence and pressure |
Don't inflate the front cap - that is a vent area and not designed to be inflated - you will just fill the three chambers through the valves that are located in the read of the kayak. Th Hobie hand pump is a high volume pump and once it gets stiff - you are there, there isn't a good way to measure PSI, but you can feel it by touch that its full - and the pump will no longer add air. Call your dealer directly for help if needed 1800hobie49 |
|
| Author: | Thinwater skinner [ Tue Aug 18, 2009 7:08 am ] |
| Post subject: | Re: i9s inflation sequence and pressure |
Also; remember not to use an electric pump to fill, just to start the process if necessary. Electric pumps will continue to fill and split a seam!!! There is a user manual somewhere in the hobie site... Go there and search the site.... |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|