| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Inflatable series sail batten cap? http://www.hobie.com/au/en/forums/viewtopic.php?f=47&t=47081 |
Page 1 of 1 |
| Author: | PeterWeb [ Wed Apr 03, 2013 7:25 pm ] |
| Post subject: | Inflatable series sail batten cap? |
Hi folks, My wife noticed our sail batten was loose in its pocket, so we consulted the instructions on how to re-seat and tie it. They implied there should be a black batten cap which we should fit and tie to hold the batten in. Only... we have no cap - if it was there when the got the sail, it isn't now. Can someone in the know please confirm there should be a cap and, if so, the part number for the i-series cap so I can order one? Thanks! |
|
| Author: | PeterWeb [ Sat Nov 02, 2013 5:40 pm ] |
| Post subject: | Re: Inflatable series sail batten cap? |
Really? Nobody has a clue what I'm talking about here? |
|
| Author: | Dr.SteelheadCatcher [ Sun Nov 03, 2013 7:43 am ] |
| Post subject: | Re: Inflatable series sail batten cap? |
PeterWeb, I own a PA-14 and not a i-series inflatable......from what I can see, the batten is common among both the Mirage and i-series sail kit. From this file I found on line, http://static.hobiecat.com/digital_asse ... ailKit.pdf it shows the batten cap you describe. I looked up the Parts and Accessories sail info and found P/N 84509001 for the replacement batten cap...... cost less than $5.00 and the replacement batten is P/N 84511....cost less than$20.00. Hope this helps! |
|
| Author: | PeterWeb [ Wed Nov 06, 2013 6:02 pm ] |
| Post subject: | Re: Inflatable series sail batten cap? |
Dr.SteelheadCatcher wrote: PeterWeb, I looked up the Parts and Accessories sail info and found P/N 84509001 for the replacement batten cap...... cost less than $5.00 and the replacement batten is P/N 84511....cost less than$20.00. Hope this helps! Many thanks Doc! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|