| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Matt Miller?? Water in bilge?? http://www.hobie.com/au/en/forums/viewtopic.php?f=47&t=50536 |
Page 1 of 1 |
| Author: | frankfp [ Sun Mar 09, 2014 8:58 am ] |
| Post subject: | Matt Miller?? Water in bilge?? |
Matt, I read a few post on water in the bilge and nobody seems to have a fixable answer, my last trips out in Fort Myers Beach Florida I have a lot of water in bilge about a gallon or more, Matt how do we solve that problem, I have been using hand bilge pump to remove the water in the bilge before I can move the Hobie i12, very hard to pull up the ramp before removing the bilge water. Thanks for any help on this problem. Take care--------Frank |
|
| Author: | redsinthehead [ Sun Mar 09, 2014 10:31 am ] |
| Post subject: | Re: Matt Miller?? Water in bilge?? |
Not trying to cut Matt off ... but WHY do you have water in the hull? Fix the problem, not the result. Where's it coming from? |
|
| Author: | Thinwater skinner [ Mon Mar 10, 2014 9:20 am ] |
| Post subject: | Re: Matt Miller?? Water in bilge?? |
I am not matt, but most likely this is a warrenty issue.. Talk to your dealer about the problem and see what they can do for you. Hobie will stand behind their product, but you need to have a dealer contact the company. Good luck and post up the response you get from the dealer and hobie... |
|
| Author: | mmiller [ Mon Mar 10, 2014 10:03 am ] |
| Post subject: | Re: Matt Miller?? Water in bilge?? |
Water has to be entering somewhere. Possibly the drain scuppers or a hole. Drain scuppers have had issues. Contact your dealer. They can contact our warranty staff for technical support on that. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|