| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Tear in seam between tubes and floor http://www.hobie.com/au/en/forums/viewtopic.php?f=47&t=56282 |
Page 1 of 1 |
| Author: | Neckbone [ Thu Oct 22, 2015 4:44 am ] |
| Post subject: | Tear in seam between tubes and floor |
I have an i14t and noticed Friday that I have a tear in the rubber strip between the tube and floor in about the middle of the yak. I assume that's a place for water to enter the bilge. What do I use to fix this? Will the pvc patch that came with it work? It's an '09 boat. Sent from my E6782 using Tapatalk |
|
| Author: | mmiller [ Thu Oct 22, 2015 8:48 am ] |
| Post subject: | Re: Tear in seam between tubes and floor |
There was a repair kit included with the boat. You can get another that includes some patch material and glue from a dealer. 79052009 i - HULL REPAIR KIT |
|
| Author: | Neckbone [ Thu Oct 22, 2015 9:06 am ] |
| Post subject: | Re: Tear in seam between tubes and floor |
Yeah, i have that. It just looks like the material between the tube and floor is different than the pvc tubes and floor. So, i just patch it the same say I'd patch a hole in the tube? Sent from my SM-T217S using Tapatalk |
|
| Author: | mmiller [ Thu Oct 22, 2015 9:55 am ] |
| Post subject: | Re: Tear in seam between tubes and floor |
Yes. The materials should be the same... just a different color. |
|
| Author: | Neckbone [ Fri Oct 23, 2015 7:20 am ] |
| Post subject: | Re: Tear in seam between tubes and floor |
Awesome, thanks Matt Sent from my SM-T217S using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|