| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| How did the water get in the bilge? http://www.hobie.com/au/en/forums/viewtopic.php?f=47&t=60166 |
Page 1 of 1 |
| Author: | melnoelhorn [ Fri Mar 24, 2017 12:00 pm ] |
| Post subject: | How did the water get in the bilge? |
I have a 2017 i14t. I have been using it in Florida for the past 3 months. Yesterday I deflated and packed it up for the first time. I decided to see if there was any water in the bilge and was surprised by how much water came out. How does water get into this space? I would think that the bilge should be dry unless there there is a leak in the bottom. I have not detected a leak in the air chambers. Should I inflate the bilge and look for a leak? How would I do that? Thanks. |
|
| Author: | HStrech [ Mon Mar 27, 2017 11:18 am ] |
| Post subject: | Re: How did the water get in the bilge? |
Inflate, wet with soapy water and look for bubbles that indicate a leak. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|