Hobie Forums
http://www.hobie.com/au/en/forums/

Hobie Fiesta Plug-in Wheels
http://www.hobie.com/au/en/forums/viewtopic.php?f=47&t=69533
Page 1 of 1

Author:  KrisR [ Wed Feb 23, 2022 8:01 am ]
Post subject:  Hobie Fiesta Plug-in Wheels

Is there an option for Plug-in Wheels on the Fiesta? Do you have to use two sets on the front MirageDrive wells?

Author:  yaw_string [ Fri Feb 25, 2022 1:33 am ]
Post subject:  Re: Hobie Fiesta Plug-in Wheels

Until someone directly answers your question, I will pass along my approach for large multipassenger inflatables. I use one of those collapsible handcarts that open up to form an L shape. I lay the cart on its back and put one end of the hull on the extended frame. I pick up the hull's opposite end and it becomes sort of a wheelbarrow. Only need a line looped over the hull and the handle end of the handcart to keep it together; usually I use an always-affixed bow line. On the way home I multitask the handcart to lug in a load of groceries. Diagram:

I ========================== hull
O------- handcart

Author:  mmiller [ Fri Feb 25, 2022 9:22 am ]
Post subject:  Re: Hobie Fiesta Plug-in Wheels

Fiesta uses the same drive wells as all inflatables, so that would allow use of the plug-in carts. You would need two to balance the load.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/