no bite, dang
looks like my actual cost will be about $60 per 25' roll.... 2 types needed, so $120 for that car type HD seals. If I do it, I'll let ya'll know in case anyone wants the 3/4 roll I don't use!
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| To Hobie: Supply weatherstrip as DIY "Warranty" Work? http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=37137 |
Page 1 of 1 |
| Author: | KevNC [ Sat Jul 30, 2011 9:49 am ] |
| Post subject: | To Hobie: Supply weatherstrip as DIY "Warranty" Work? |
I've had my TI 2 months and only lightly used the front hatch. The weatherstrip has all separated and I don't see how it could hold up for anyone. I saw a post on the forums on how to easily fix but the min order of 25' or whatever it was would be over $200! Any way Hobie could buy up some of this stuff and send just the correct amount to those suffering the bad hatch seal? |
|
| Author: | KevNC [ Mon Aug 01, 2011 6:13 pm ] |
| Post subject: | Re: To Hobie: Supply weatherstrip as DIY "Warranty" Work? |
no bite, dang looks like my actual cost will be about $60 per 25' roll.... 2 types needed, so $120 for that car type HD seals. If I do it, I'll let ya'll know in case anyone wants the 3/4 roll I don't use! |
|
| Author: | mmiller [ Tue Aug 02, 2011 3:39 pm ] |
| Post subject: | Re: To Hobie: Supply weatherstrip as DIY "Warranty" Work? |
? We can't get to every post... especially in the summer season. This is primarily a user based forum... not 100% company reviewed, but I try. Loc tite super glue is the suggested fix for loose gaskets. Replacement trim loc is listed in the catalog, but this would be a warranty issue if under 2 years old. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|