| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Replacing Rudder "Up" Line http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=47691 |
Page 1 of 1 |
| Author: | travisw119 [ Tue May 21, 2013 5:00 pm ] |
| Post subject: | Replacing Rudder "Up" Line |
Has anyone replaced their own rudder "Up" line. Mine recently broke & I am unsure if I should attempt a repair w/ current line. Or take to dealer. Any insight would be appreciated |
|
| Author: | KayakingBob [ Tue May 21, 2013 5:03 pm ] |
| Post subject: | Re: Replacing Rudder "Up" Line |
It's easy, once you understand it. Where did it break? What condition is the rest of the line (should it be replaced)? |
|
| Author: | mmiller [ Wed May 22, 2013 1:03 pm ] |
| Post subject: | Re: Replacing Rudder "Up" Line |
http://www.hobiecat.com/support/mirage-adventure-island/ There are several different instructions that should help. |
|
| Author: | travisw119 [ Wed May 22, 2013 7:29 pm ] |
| Post subject: | Re: Replacing Rudder "Up" Line |
It broke just below the t-handle in front seat. Then retracted inside the boat. I pulled the back seats line out too while not thinking. I will look at the instructions mmiller |
|
| Author: | KayakingBob [ Wed May 22, 2013 8:09 pm ] |
| Post subject: | Re: Replacing Rudder "Up" Line |
That's an odd place for a break. You probably should look for burrs or some other problem in that area unless it wore out while pulled out. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|