Hobie Forums
http://www.hobie.com/au/en/forums/

So not to sound silly but
http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=51452
Page 1 of 1

Author:  DM06 [ Sat May 31, 2014 7:41 am ]
Post subject:  So not to sound silly but

I give up. What is the square bit of plastic sewn on most every PFD for? Seems like an industry standard size and shape. They all seem to have one in various places and angles. The slits seem too small to fit a radio or GPS belt clip through them. Looks like 1 in. webbing might fit through it but nothing I've ever purchased "marine wise" has specifically come with a way to be attached to this square. The D ring next to it is a little more self explanatory.

So.... what is it for?
Image

Author:  Tom Kirkman [ Sat May 31, 2014 8:04 am ]
Post subject:  Re: So not to sound silly but

Isn't it obvious? If you don't know, I'm not going to tell you. (In other words, I have no idea either.)

Author:  Chekika [ Sat May 31, 2014 8:30 am ]
Post subject:  Re: So not to sound silly but

It is called a "PFD lash tab" and frequently is used for a quick release knife--the knife is intended for emergency situations such as to cut lines you may be tangled in. Here is an example,

Image


Such knives are occasionally carried by sailors, but they are always part of the safety gear of whitewater kayakers.

Keith

Author:  DM06 [ Sat May 31, 2014 9:17 am ]
Post subject:  So not to sound silly but

Well see, there I go. That makes sense. Thanks!

Personally I wish someone would make a PDF with webbing on it like the gear/vests we have in the military. That way you could add the type of pockets you wanted, wherever you wanted them. I've yet to find a PDF that was perfect for me. Pockets always seem to be the wrong shape, size, or in the wrong location.

Author:  Chekika [ Sat May 31, 2014 9:24 am ]
Post subject:  Re: So not to sound silly but

I guess you could say, "Join the world of 1-size fits all." NRS.com has lots of vests. Many people use the NRS c-vest--lots of pockets and loops to attach things. http://www.nrs.com/product/2157/nrs-cvest-mesh-back-pfd

Keith

Author:  DM06 [ Sat May 31, 2014 10:36 am ]
Post subject:  Re: So not to sound silly but

I actually have that back ordered from REI. We'll see how it works out.

Author:  dregsfan [ Sat May 31, 2014 5:49 pm ]
Post subject:  Re: So not to sound silly but

That is for more than just knives. You can clip on emergency "overboard" lights and/or Eperbs as well.

Author:  tonystott [ Sat May 31, 2014 6:49 pm ]
Post subject:  Re: So not to sound silly but

I have three PFDs, a Trek Ultra for everyday including fishing, a manual "horseshoe" PFD, for simplicity if just sailing around, and my "expedition" type manual inflatable Stormy Lite.

This has no less than six external zippered pockets (four with drainholes, two behind the fabric, plus two internally accessed pockets, and eight cloth loops for attaching equipment externally. This was still not enough for me, so I got the factory to add two horizontal loops on the shoulders to take my VHF and PLB on either shoulder.

This PFD has the bladder inflate >inside< the jacket, so must by definition be quite a loose fit to allow room for the inflated bladder. This translates into an incredibly comfortable fit. However, in order to prevent the jacket going up around the ears when inflated, there are twin thigh straps, which are again very unobtrusive. Here it is as standard.
Image

The company makes all sorts of PFDs for professionals like lifeboat crew, coast guard, harbour pilots etc, so I am very confident about their expertise.. Here is their website
http://www.stormylifejackets.com.au/rec ... -as4758-1/

Author:  ChangeMan [ Tue Jun 03, 2014 8:58 pm ]
Post subject:  Re: So not to sound silly but

Apparently Stormy started when a professional fisherman husband nearly drowned.
He wasn't wearing a life jacket because they are uncomfortable, especially to work in.
So the wife made him a comfortable jacket to work it, which also included inflation.

They have cirtainly come a long way since then.

Author:  DM06 [ Fri Jun 06, 2014 8:48 am ]
Post subject:  So not to sound silly but

Cool kit.

This is what I was thinking.

Image

Add the self inflation like your vest, and then offer various different pockets. The user can then place them where he wants them on the vest. Can swap out pockets for different "missions" etc.

I have a bag that has this webbing on the exterior as well as interior surfaces. It's the coolest thing I've ever owned. I bought it to use as my aid bag in Iraq but still use it on a daily basis as well as for camping, biking, sailing etc.

Even has an internal space to put foam to make it buoyant.

It's a Kifaru Marauder for those gear hounds out there.
http://store.kifaru.net/marauder-2500ci ... s-p47.aspx

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/