| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2012 AI Broken Sterring Handle/Knob Questions http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=53916 |
Page 1 of 1 |
| Author: | ShakaGeoff [ Wed Feb 11, 2015 9:46 pm ] |
| Post subject: | 2012 AI Broken Sterring Handle/Knob Questions |
Aloha, I broke my steering knob handle and am trying to replace it with a new one. A couple simple questions: 1. Does any one know the exact size allen wrench that is needed to unscrew the handle? I can't tell if the few I have in that size range are the wrong kind or a bit too small, or if the head is stripped or what - I know you can have a slightly different size and strip these things easily... 2. When I do get the old handle off, what should I expect from how the assembly on the inside that connects to the handle will react... aside from becoming disconnected of course... I just don't know how fragile that situation is and if there is any caution to be taken. Thanks much! |
|
| Author: | ShakaGeoff [ Tue Feb 17, 2015 1:58 pm ] |
| Post subject: | Re: 2012 AI Broken Sterring Handle/Knob Questions |
Hi, I'm still looking for some help here. Here's what I have found on that allen wrench size: in standard, 1/8 too small, 9/64 too big (?!?!) in metric, 3mm too small, 4mm to bog (do they make a 3.5mm?) Thanks again, might just have a 1/8 stripped bolt, but still not sure. |
|
| Author: | mmiller [ Tue Feb 17, 2015 2:11 pm ] |
| Post subject: | Re: 2012 AI Broken Sterring Handle/Knob Questions |
Not sure what you have... Knob? The knob kit comes with a Phillips head screw. 88991355 Knob Assembly https://static.hobiecat.com/item_attachments/88991355z1.jpg Steering handle? 81013001 STEERING HANDLE 2011 STD LENGTH z5.jpg) 8030126 SCREW 10-32 x 3/8 FLNG BTN HX HDMS HEX SIZE: 1/8 Try an EZ-OUT if the screw is stripped. |
|
| Author: | quattroguy [ Tue Feb 17, 2015 2:18 pm ] |
| Post subject: | Re: 2012 AI Broken Sterring Handle/Knob Questions |
Yes 3.5 mm is a real size. And the one I can never find! |
|
| Author: | vetgam [ Tue Feb 17, 2015 4:34 pm ] |
| Post subject: | Re: 2012 AI Broken Sterring Handle/Knob Questions |
ShakaGeoff, when you unscrew the handle, you can just lift it up. The assembly below the knob and in the in the hull stays in one piece and nothing with come apart except that now you can lift up the handle. Vetgam |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
