Hobie Forums :: View topic - 2015 Adventure Island Measurements needed

Hi all
I am need 2 measurements of the new AI.
1. From the centre of the mirage well to the tip of the bow. I answered this the first time you asked (don't remember where that was). I believe it was 80" but you might check my previous answer (to your previous question).
2. From the tip of the bow to the rear most part of the amas when they are folded. If they protrude past the rudder. The amas are essentially even with the end of the rudder when folded in. The AI 2 bow to rudder measurement is 16' 7".

I have an interior wall in my garage/shed, that may need to be moved. Would like to get it done if needed before I take delivery.

Thanks in advance.

Steve.

Author:	Hogman [ Mon Feb 23, 2015 12:32 am ]
Post subject:	2015 Adventure Island Measurements needed
Hi all I am need 2 measurements of the new AI. 1. From the centre of the mirage well to the tip of the bow. 2. From the tip of the bow to the rear most part of the amas when they are folded. If they protrude past the rudder. I have an interior wall in my garage/shed, that may need to be moved. Would like to get it done if needed before I take delivery. Thanks in advance. Steve.

Author:	Chekika [ Mon Feb 23, 2015 8:12 am ]
Post subject:	Re: 2015 Adventure Island Measurements needed
Hogman wrote: Hi all I am need 2 measurements of the new AI. 1. From the centre of the mirage well to the tip of the bow. I answered this the first time you asked (don't remember where that was). I believe it was 80" but you might check my previous answer (to your previous question). 2. From the tip of the bow to the rear most part of the amas when they are folded. If they protrude past the rudder. The amas are essentially even with the end of the rudder when folded in. The AI 2 bow to rudder measurement is 16' 7". I have an interior wall in my garage/shed, that may need to be moved. Would like to get it done if needed before I take delivery. Thanks in advance. Steve. Keith

Author:	Hogman [ Mon Feb 23, 2015 12:36 pm ]
Post subject:	Re: 2015 Adventure Island Measurements needed
[quote="Chekika"][quote="Hogman"]Hi all I am need 2 measurements of the new AI. 1. From the centre of the mirage well to the tip of the bow. I answered this the first time you asked (don't remember where that was). I believe it was 80" but you might check my previous answer (to your previous question). 2. From the tip of the bow to the rear most part of the amas when they are folded. If they protrude past the rudder. The amas are essentially even with the end of the rudder when folded in. The AI 2 bow to rudder measurement is 16' 7". Thanks for that Keith.

Hobie Forums http://www.hobie.com/au/en/forums/

2015 Adventure Island Measurements needed http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=53996	Page 1 of 1

Page 1 of 1	All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/