| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Bridge clearance http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=58044 |
Page 1 of 1 |
| Author: | smithcorp [ Mon Jun 20, 2016 11:23 pm ] |
| Post subject: | Bridge clearance |
Hi all. I should be able to get my TI beneath a bridge with a 6.4m clearance shouldn't I? |
|
| Author: | tonystott [ Tue Jun 21, 2016 1:49 am ] |
| Post subject: | Re: Bridge clearance |
smithcorp wrote: Hi all. I should be able to get my TI beneath a bridge with a 6.4m clearance shouldn't I? Easily! I regularly take my TI (with 6 added inches of spinnaker mast-topper plus Windward wind arrow) beneath a bridge with clearance stated as 6.0 metres at HWS (high water spring tide). Mind you, from below it looks scarily close, but in reality there is plenty of room. 6.4 metres is a no-brainer. |
|
| Author: | smithcorp [ Tue Jun 21, 2016 2:19 am ] |
| Post subject: | Re: Bridge clearance |
Thanks Tony. I think we are planning to stooge around Middle Harbour/Spit Bridge on the weekend and heading under Spit Bridge. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|