My Seitech customized TI dolly.
This is something Hobie should offer.
It’s working very good and I can leave the boat on the Dolly safely.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Custom TI Dolly http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=61451 |
Page 1 of 1 |
| Author: | mswlogo [ Sat Sep 02, 2017 4:40 pm ] |
| Post subject: | Custom TI Dolly |
My Seitech customized TI dolly. This is something Hobie should offer. It’s working very good and I can leave the boat on the Dolly safely.
|
|
| Author: | TI_Tom [ Sat Sep 02, 2017 5:06 pm ] |
| Post subject: | Re: Custom TI Dolly |
Nice! Sent from my SM-G950U using Tapatalk |
|
| Author: | Defy [ Sat Sep 02, 2017 7:21 pm ] |
| Post subject: | Re: Custom TI Dolly |
Nice i was thinking of a similar thing with Trailex dolly. Problem was i launch from a slippery boat ramp and almost lost it once walking it down. So now I just hook the trailer to a golf cart or my truck. Sent from my iPhone using Tapatalk |
|
| Author: | mswlogo [ Wed Sep 06, 2017 9:07 am ] |
| Post subject: | Re: Custom TI Dolly |
I added one more photo to the opening post to show that I can Launch and Retrieve while fully rigged as well and never have to remove Ama/Aka's. I removed the supports for the old strap and can now just lift on the Ama slightly and spread it's wings. I might add wheels to the forward Cradle. Main shaft is bending, well flexing really, quite a bit. |
|
| Author: | nap [ Wed Mar 14, 2018 6:01 pm ] |
| Post subject: | Re: Custom TI Dolly |
Can you please share the Seitech model you midified. and what were added? I like how you modied it. |
|
| Author: | itiming [ Sun May 13, 2018 7:26 pm ] |
| Post subject: | Re: Custom TI Dolly |
Wondering how this dolly has worked for you? Am looking at two other dolly's to potentially modify with Hobie Tandem Island cradles. One is the Trailex Universal Dolly. https://www.trailex.com/products/pc/Universal-Dolly-SUT-300U-p7.htm The other is the WheelEEZ Boat Dolly. https://wheeleez.com/product/wz1-bd-42ub/ Our Hobie dealer recommended the Hobie dolly. I tried that and had difficulty getting the Hobie dolly under the TI both on land and getting out of the water. Was thinking these dollys with a longer tongue would be easier to place/load the TI with. The balloon wheels are very buoyant adding to the difficulty of getting a good balanced placement under the TI--which is my #1 problem I now have with the Hobie scupper cart. Physics gets the upper hand. Have any others tried these or similar dollys? Looking for feedback on potential strength issues, with putting a front cross-bar on the tongue and it torquing the tongue too much. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|