Hobie Forums
http://www.hobie.com/au/en/forums/

SeaDek on TI?
http://www.hobie.com/au/en/forums/viewtopic.php?f=71&t=66086		 Page 1 of 1
Author:  Diver_fcd [ Mon Feb 10, 2020 4:44 pm ]
Post subject:  SeaDek on TI?
Have any of you installed SeaDek on your TIs? Pros/cons?
Any advice and/or pictures would be appreciated.
Author:  pro10is [ Mon Feb 10, 2020 8:37 pm ]
Post subject:  Re: SeaDek on TI?
I installed HydroTurf on the deck of my TI. It was an excellent improvement.

Image
Author:  lastworm [ Mon Feb 10, 2020 10:07 pm ]
Post subject:  Re: SeaDek on TI?
[quote="pro10is"]I installed HydroTurf on the deck of my TI. It was an excellent improvement.

Looks like a neat job! How did you do the template? Masking tape trick?
Author:  pro10is [ Tue Feb 11, 2020 8:41 am ]
Post subject:  Re: SeaDek on TI?
For a template, I simply used clear plastic sheeting, the kind used as a vapor barrier for insulation. I carefully laid it out over the deck and traced the pattern onto the sheeting using a sharpie. I then cut the sheeting on these lines and laid it over the HydroTurf as a template.

This worked great and allowed for a very accurate installation. There may also be other ways to do this, but this worked well for me.
Author:  lastworm [ Tue Feb 11, 2020 3:30 pm ]
Post subject:  Re: SeaDek on TI?
Nice, looks very neat!

My plan B was to use that technique, I ended up creating a template with masking tape and tracing it. But in hindsight the clear plastic option would have been a lot more accurate.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/