Hobie Forums
http://www.hobie.com/au/en/forums/

Vantage CT seat webbing repair / replace?
http://www.hobie.com/au/en/forums/viewtopic.php?f=75&t=66099
Page 1 of 1

Author:  itiming [ Thu Feb 13, 2020 5:22 pm ]
Post subject:  Vantage CT seat webbing repair / replace?

Wondering how to repair/replace my Vantage CT seat webbing for my 2017 Tandem Island rear seat.

The seat back's webbing along the right side began to tear, then it has separated -- pulled out from under the retaining rod.

Webbing separation shown:
Image

Is the webbing something I could order/replace? Or a dealer? Other?

Thanks for any advice.

Author:  mmiller [ Fri Feb 14, 2020 9:15 am ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

Order from your dealer.

865092 MESH SEAT BACK CT SEAT

Image

Author:  Thomas [ Fri Oct 02, 2020 8:32 pm ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

Okay, got my Vantage CT replacement seat back fabric. It came with no instructs. Several Internet searches yield no instructs on how to install this. All I found was a Vantage seat repair video, no Vantage CT info! How do I replace this thing?

Author:  mmiller [ Sat Oct 03, 2020 11:43 am ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

Small screws hold a wire in the groove. Remove the screws. Reset the wire in the new seat back. Press the wire in the grove and install screws to hold.


Author:  Thomas [ Sat Oct 03, 2020 1:37 pm ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

This video just didn't come up in multiple searches. Thanks!

Author:  LawProf [ Sun Sep 12, 2021 8:08 am ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

Thanks for this message board and video. Like the other post, it did not come up with multiple searches. The seat back replacement would have been daunting without it. I’ve now ordered a replacement mesh seat back from my dealer.

Love my Hobie Revolution 11

Author:  Aero_70 [ Fri Dec 10, 2021 8:07 am ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

Is there a link to the video?
I have a 2015 and my back mesh has started to split.
Is it just the 2 screws that are just above the upper cross piece?

Author:  KeithB [ Sun Apr 06, 2025 6:43 am ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

I just replaced my seat back following this video. Many thanks as it made the job much easier having a clue how it's all assembled. Is it just a coincidence that mine was torn on the right side also.

Author:  Wijnand de Wolf [ Mon Jun 30, 2025 10:43 am ]
Post subject:  Re: Vantage CT seat webbing repair / replace?

Hi Ladies n gents,

This weekend one of the two metal pins that keeps the mesh of the back support in place on one of my Vantage CT seats snapped in half, resulting in a sharp edge halfway the backsupport. While searching for others that encoutered and solved this issue didn't find any.

I've been looking for the part # to see if i can replace it with the original hobie part, no luck so far.

Dit anyone of you have a similar issue while replacing a backrest mesh? Is it going to require a a Mc Guiver solution?

Will post a picture later if needed.

Best, WdW

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/