| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| pa steering http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=34002 |
Page 1 of 1 |
| Author: | pasmitty [ Mon Feb 14, 2011 1:36 pm ] |
| Post subject: | pa steering |
i dont have the new steering setup i have the old one under the seat when i turn the nob it goes half way without even moveing the rudder then u feel it get tight and move the rudder i think the ropes are lose i dont know anyone eles have this problem any ideas how to fix it |
|
| Author: | mmiller [ Mon Feb 14, 2011 5:55 pm ] |
| Post subject: | Re: pa steering |
First... try tensioning the small knob under the steering handle. That wraps line round and round till the correct adjustment is made. If you can not take enough slack out... open the rudder access lid and make adjustments there. It's really pretty easy, so just have a look. If you need further help, be sure to call your dealer. They should be able to tune it up. This topic has a video link showing the rudder access and adjustments: http://www.hobiecat.com/forums/viewtopic.php?f=78&t=20521 |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|