Hobie Forums
http://www.hobie.com/au/en/forums/

Looking for any parts
http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=37633		 Page 1 of 1
Author:  blz85 [ Tue Aug 16, 2011 5:26 pm ]
Post subject:  Looking for any parts
I am looking for any stock parts for a PA. Please let me know what you have and what price your looking for.
Author:  blz85 [ Mon Aug 22, 2011 5:33 pm ]
Post subject:  Re: Looking for any parts
Any parts you have! Screws,Rails, anything that can be removed!
Author:  mythman [ Tue Aug 23, 2011 1:19 pm ]
Post subject:  Re: Looking for any parts
How much of this stuff do you want?

I will not piece meal these parts out............it is all ( or almost all) or nothing.

Image

From left to right:

Middle and bow hatch with rubber gasket seals

Image

ssern handle, back side of rod tube seal, sail mount tube, new mounting boards, mesh side pockets, 8" twist and seal hatch

Image

Rudder ( will cables and pulleys) rudder access cover and rod tubes

Image

Various bungees, screws and mounting hardware and anchor trolley

Image

Image

Will take 50% of retail and you pay for the shipping.

If interested post up and give me a telephone # to call.
Author:  blz85 [ Tue Aug 23, 2011 7:01 pm ]
Post subject:  Re: Looking for any parts
How much for the rod holders and all the bungees?
Author:  mossy [ Tue Aug 23, 2011 8:23 pm ]
Post subject:  Re: Looking for any parts
how much for the center hatch gasket just blew mine off thank's willy b
Author:  thoray [ Wed Aug 24, 2011 2:34 am ]
Post subject:  Re: Looking for any parts
how much for the rear handle ?


thoray
Author:  mythman [ Wed Aug 24, 2011 8:46 am ]
Post subject:  Re: Looking for any parts
blz85 wrote:
I am looking for any stock parts for a PA. Please let me know what you have and what price your looking for.


I am sorry blz85, I misunderstood and thought you wanted a whole lot of parts............the rod holders and bungees is...........well minimal.

I am not sure it is worth my time to look up the retail prices, price it, package it and ship it, piece by piece.

I will have to think about this...........mean while I am going fishing. :D
Author:  mythman [ Wed Aug 24, 2011 9:31 am ]
Post subject:  Re: Looking for any parts
I was responding to blz85's post and I had the impression he wanted a lot of stuff and would take a lot.

Even though I am a retiree, I just don't want to take the time to piece meal this stuff out and handle packaging and shipping.

Sorry if anyone was misled..........my suggestion is for individual pieces just go see your local Hobie dealer.
Author:  blz85 [ Wed Aug 24, 2011 1:03 pm ]
Post subject:  Re: Looking for any parts
I thought it would be easier just to say I am looking for all parts. I'm looking for most parts except hatches and steering parts. sorry if i misled you. If anyone has any parts they would like to get rid of please let me know!
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/