Fish Finder mounted to the handrail. Scotty round rail mount used. Madd Frogger table and transducer arm are used. Hobie fishfinder mount made for the Mark 5X Pro is mounted on the table and the fish finder is screwed to the mount. Power comes from the battery inside the tackle box by running the wires under the seat and clipping onto the post which I drilled and wired into the box. Seems like a lot of steps but I wanted to be able to swivel or push the fishfinder around to a comfortable position and I wanted it close to my head because I am half blind anyway. The whole setup up is easily removed during transport, storage or when I don't want to bring it along. The battery is easily charged by attaching a battery tender to the post while back at the ranch. I wanted the transducer in the water, not through the hull. This was an easy set up and works excellent.
