| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| New PA on Lake Havasu AZ..."maiden voyage" http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=41295 |
Page 1 of 1 |
| Author: | SHRED56 [ Tue Feb 21, 2012 6:53 pm ] |
| Post subject: | New PA on Lake Havasu AZ..."maiden voyage" |
  No bass though. They had recently raised the water level dumping in a lot of cold water. Even the tournament bass guys were commenting on how tough it was. Had fun out there and the PA performed as expected! OBTW: That cable is my transducer cable. I like the suction cup mounting method. 
|
|
| Author: | WJdave [ Tue Feb 21, 2012 7:06 pm ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
The look on your face says it all! Another wonderful day on the water. |
|
| Author: | Tom Kirkman [ Tue Feb 21, 2012 7:47 pm ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
Only a PA owner, knows the feeling another PA owner is experiencing. |
|
| Author: | de-tension [ Tue Feb 21, 2012 8:57 pm ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
Good to see you got it out on the water. How did the trailering and loading and unloading go? |
|
| Author: | SHRED56 [ Tue Feb 21, 2012 9:19 pm ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
de-tension wrote: Good to see you got it out on the water. How did the trailering and loading and unloading go? It went well. I ended up using 2" sch 40 PVC with carpet and "keeper" straps both front and back. These hold the pipes during loading and unloading but allow for movement to follow the scupper line. Put nearly 700 miles on the Malone without issue.   
|
|
| Author: | redgrappler [ Wed Feb 22, 2012 6:53 am ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
Nice Shred. The wire you have hanging in the water, is that the tranducer? |
|
| Author: | SHRED56 [ Wed Feb 22, 2012 7:05 am ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
redgrappler wrote: Nice Shred. The wire you have hanging in the water, is that the tranducer? Yep...it's on a suction cup mount. |
|
| Author: | atavuss [ Wed Feb 22, 2012 7:55 pm ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
That Lazy Daze motorhome brings back memories! I had an early 80's unit. how much clearance do you have from the bottom of the PA to the cross bars? Might I ask why the carpet on the PVC pipes? |
|
| Author: | SHRED56 [ Wed Feb 22, 2012 8:01 pm ] |
| Post subject: | Re: New PA on Lake Havasu AZ..."maiden voyage" |
atavuss wrote: That Lazy Daze motorhome brings back memories! I had an early 80's unit. how much clearance do you have from the bottom of the PA to the cross bars? Might I ask why the carpet on the PVC pipes? I have about 3/4" of clearance to the bars. A little more on the front bar. I carpeted the tubes to see if I could avoid scratching from coarse sand or other debris. Plus it gave me more clearance from the bars and its "cushioney". 
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|