Hobie Forums
http://www.hobie.com/au/en/forums/

PRO ANGLER DOWN
http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=41417
Page 1 of 1

Author:  mossy [ Sat Mar 03, 2012 4:31 pm ]
Post subject:  PRO ANGLER DOWN

HAS THIS EVER HAPPENED TO ANY OTHER PRO ANGLER OUT THERE IT CRACKED ON BOTH SIDES OF KAYAK THIS IS THE FRONT STORAGE ALONG THE SIDE BY THE SEAT

Image

Author:  Tom Kirkman [ Sun Mar 04, 2012 8:22 am ]
Post subject:  Re: PRO ANGLER DOWN

Are we looking at the inside of the hull, or the top? I can't make out where this is.

Author:  raginjrob [ Sun Mar 04, 2012 9:39 am ]
Post subject:  Re: PRO ANGLER DOWN

Yep. Also know others with crack in same place. Call you dealer and get them to file warranty claim.

Author:  mossy [ Sun Mar 04, 2012 11:15 am ]
Post subject:  Re: PRO ANGLER DOWN

Tom Kirkman wrote:
Are we looking at the inside of the hull, or the top? I can't make out where this is.

tom thats on top its the base of the rear rod holders that the drains for the front storage

Author:  mossy [ Wed Mar 07, 2012 8:12 pm ]
Post subject:  Re: PRO ANGLER DOWN

THANK YOU TO HOBIE AND MY LOCAL SHOP NEW BOAT WILL BE IN BY END OF MARCH

Author:  imd1 [ Tue Mar 13, 2012 6:11 am ]
Post subject:  Re: PRO ANGLER DOWN

I have the same crack and I am waiting to hear back from the pictures I supplied the dealer I bought it from. Seems to be quite a few of them out there after searching the internet for others. Image

Author:  mossy [ Tue Mar 13, 2012 7:54 pm ]
Post subject:  Re: PRO ANGLER DOWN

that wiered my crack was by the drain by the little storage there on the deck how did it crack there

Author:  brickthor [ Mon Apr 02, 2012 5:05 pm ]
Post subject:  Re: PRO ANGLER DOWN

Hobie, where can we get some of the rolled up foam that you use to beef up the standing area and put it near the back of the seat to support that area as well to try and avoid future cracking?

Author:  mossy [ Tue Apr 03, 2012 8:03 pm ]
Post subject:  Re: PRO ANGLER DOWN

new pro angler should be here this week. i hope the bite is on

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/