| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| PA 12 Rudder Steering Handles http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=42255 |
Page 1 of 1 |
| Author: | SteveLIBS [ Thu Apr 19, 2012 5:59 pm ] |
| Post subject: | PA 12 Rudder Steering Handles |
So stock option seems to include a standard handle on one side, and a "knob" of sorts on the other. Can the "knob" be replaced with the handle to have the standard handles on both sides? |
|
| Author: | PA_hillbilly [ Fri Apr 20, 2012 4:44 am ] |
| Post subject: | Re: PA 12 Rudder Steering Handles |
Yes! the steering is designed to be moved to either side.... |
|
| Author: | SteveLIBS [ Fri Apr 20, 2012 9:17 am ] |
| Post subject: | Re: PA 12 Rudder Steering Handles |
Right. In the Hobie video it's mentioned I think that there's primary steering on the right, and secondary steering from the left; and that you can interchange them if you want. Got that. The primary looks like a nice lever, the secondary looks like a knob of some sorts - with a thumb press. What I'm asking is if we can replace the knob with a lever to have a lever on both the left and right? I imagine as you switch from one to the other there may be some 'play' to take up slack on the control lines? |
|
| Author: | Jbernier [ Fri Apr 20, 2012 9:24 am ] |
| Post subject: | Re: PA 12 Rudder Steering Handles |
Yes - you can install a second lever, and have 2 at the same time if you desire. (one on either side) |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|