Hobie Forums http://www.hobie.com/au/en/forums/ |
|
rod holders http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=42437 |
Page 1 of 1 |
Author: | gotcha [ Mon Apr 30, 2012 8:06 am ] |
Post subject: | rod holders |
I know I saw a guy, dont know if it was here or not. I am going to use the sail mast hole and make a rod holder instead of alwaus putting inside the tubes. I would come out of the mast witha bullheaded tee. To the right and left put to more tee on the run. Then come off the tee with bull headed tee and cut those off half way. -t---t----t----t---t- l l And was lokking at a better pushpole than yakattcks. Its good and all but if you are standing it is a little short. These push poles arent cheap. Found one I like at Cabellas. It is adjustable, and they have two versions. 6-12, or 9-17. Its called the superstick. 6' runs 209.99 and the 9' runs 229.99. These are the least expensive and can fit in a suv. Please help with all of your opinions ![]() |
Author: | Jbernier [ Mon Apr 30, 2012 8:47 am ] |
Post subject: | Re: rod holders |
You can install a Ram wedge mount 1.5" ball into the sail tube and then use any Ram rod holder there - to order just call a dealer toll free 1800hobie49 Ram wedge 1.5" part # 72023015 ($14.95) |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |