| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Livewell homemade http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=43641 |
Page 1 of 1 |
| Author: | mr.blumy [ Tue Jul 03, 2012 12:55 pm ] |
| Post subject: | Livewell homemade |
Hi, some pictures of my livewell... the check valve ![]() ![]() hand pump under the seat ![]() ![]() external on-line pump (12 Volt) ![]() dry box with switch 3 positions (Cyclic timer - Off - Manual ) and female connector to recharge the battery ![]() ![]() ![]() ![]()
|
|
| Author: | yaknrugger [ Thu Jul 05, 2012 7:02 am ] |
| Post subject: | Re: Livewell homemade |
Very nice setup. I have something very similar that I made for my outback. I like the additional mods you added. What thickness intake hose are you using? 1/2 or 3/4"? |
|
| Author: | mr.blumy [ Thu Jul 05, 2012 10:24 am ] |
| Post subject: | Re: Livewell homemade |
yaknrugger wrote: What thickness intake hose are you using? 1/2 or 3/4"? The check valve and black tube is 1/2" (13 mm) and the white intake hose is 0,59 in (15 mm). The transparent tube of the pump on-line is 1/2 " The cyclic timer has time adjustable from 0 to 30 minutes - with a minimum resolution of 7 seconds for time on or off. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|