| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Question? http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=46732 |
Page 1 of 1 |
| Author: | bassmann [ Tue Mar 05, 2013 9:56 pm ] |
| Post subject: | Question? |
I am making a trip to Sand Hollow lake later this month and want to lock my PA 14 to the trailer. Is running a chain or cable through the mirage drive the best way to keep it from being stolen? |
|
| Author: | Chopcat [ Tue Mar 05, 2013 10:41 pm ] |
| Post subject: | Re: Question? |
Yes. It s a sensible way to lock it up Unless you can keep it inside Cc |
|
| Author: | squidder 329 [ Wed Mar 06, 2013 7:16 am ] |
| Post subject: | Re: Question? |
They could cut the chain, if you want remove the seat as well, replacing or purchasing the mirage drive and seat probably wouldn't be worth their time. |
|
| Author: | islandspeed2001 [ Wed Mar 06, 2013 8:47 am ] |
| Post subject: | Re: Question? |
If they want it, they will take it I travel to tournaments/trips all the time. I simple purchased a good locking cable that I run through the scupper/mirage holes and secure to the trailer. Haven't purchased one yet, but understand they are making cable's with sirens/flashing lights. Do a search on-line. |
|
| Author: | AllElectricPA14 [ Wed Mar 06, 2013 9:09 am ] |
| Post subject: | Re: Question? |
I lock the rear handle to the support crossbar on the rear of the truck. Then I lock through the seat and did lock through the cart inserted from the top too. Now that cart is going to be long gone so I will lock the new trailer stuff down. |
|
| Author: | uno mas [ Wed Mar 06, 2013 9:27 am ] |
| Post subject: | Re: Question? |
I run a cable thru the mirage drive opening, around/thru the seat and lock to the trailer. My grandpa always said, "locks are meant to keep the honest people out." If they want it, they'll find a way to get. I'll just do my best to make as difficult for them. And a tip...I use a high quality combination lock, so I don't have to worry about losing the key during a trip or tournament. Cheers Drew |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|