Here's the diagram for anyone that can't find it. Good to hear you were able to sort it out.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Pro Angler 12 stearing failure http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=48598 |
Page 1 of 1 |
| Author: | Pat in Eureka [ Tue Jul 23, 2013 5:54 pm ] |
| Post subject: | Pro Angler 12 stearing failure |
Pro Angler 12 steering repair My PA 12 is less than 3 months old and treated gently. Last week the rudder stopped working. In the rudder adjustment hatch I can see a larger black line and a smaller blond line. On one side the blond line is loose and feels like it would just pull out. I didn't pull much because I don't see how to get this stuff back together. The download manual does not describe how to repair the steering lines. I need to find a description of this process so I can get back on the water. Pat at Eureka |
|
| Author: | Pat in Eureka [ Wed Jul 24, 2013 12:08 pm ] |
| Post subject: | Re: Pro Angler 12 stearing failure |
I found that one control line loop had fallen off the rivet post. The fix was easy - I put the loop back on the rivet post. I don't know why the line fell off, but I think the lines had become loose in the first weeks of use. the resource pages at Hobie PA 12 have an excellent diagram of the steering lines. |
|
| Author: | Bcastile [ Wed Jul 24, 2013 4:55 pm ] |
| Post subject: | Re: Pro Angler 12 stearing failure |
Here's the diagram for anyone that can't find it. Good to hear you were able to sort it out.
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|