Hobie Forums
http://www.hobie.com/au/en/forums/

PA tool kit
http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=51427		 Page 1 of 1
Author:  jslager [ Wed May 28, 2014 10:25 am ]
Post subject:  PA tool kit
What tools do folks carry to cover most situations where you would need to fix something on your PA?
Author:  Elgeebee [ Wed May 28, 2014 7:13 pm ]
Post subject:  Re: PA tool kit
A small wrench for the cable tension nuts, and an allen wrench for the main rod/pulley rod keeper screws on the Mirage Drive. My regular fish pliers come in handy too, especially for removing the round wire pieces that hold the fins on. Several times I've had to remove a fin to bend a rod back, while on the water...
Author:  markbxr400 [ Fri Jun 20, 2014 10:47 am ]
Post subject:  Re: PA tool kit
Tools:
Pliers,
adjustable wrench,
phillips head and flathead screwdrivers,
allen wrench to fit drive set screws,
allen wrench to fit rudder pulley.

Spare parts include:

For mirage drive -
spare fin/mast (when I upgraded my Outback and Revo to ST Turbos, I had 4 spare standard fins/masts),
sprocket,
outhaul block,
clevis pin and lock ring

For rudder -
Rudder pin
Rudder drum screw
Sister screw set for rudder
Author:  islandspeed2001 [ Fri Jun 20, 2014 12:33 pm ]
Post subject:  Re: PA tool kit
markbxr400 wrote:
Tools:
Pliers,
adjustable wrench,
phillips head and flathead screwdrivers,
allen wrench to fit drive set screws,
allen wrench to fit rudder pulley.

Spare parts include:

For mirage drive -
spare fin/mast (when I upgraded my Outback and Revo to ST Turbos, I had 4 spare standard fins/masts),
sprocket,
outhaul block,
clevis pin and lock ring

For rudder -
Rudder pin
Rudder drum screw
Sister screw set for rudder


Any room left for fishing gear :mrgreen:
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/