| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| PA rudder control http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=52374 |
Page 1 of 1 |
| Author: | trevore [ Fri Aug 01, 2014 10:55 pm ] |
| Post subject: | PA rudder control |
Can anyone tell me if the rudder control handle on a PA can be turned around so that the long end is facing the rear of the boat? I rented one recently and spent some time paddling it. My paddle hung up under the handle several times and just wanted to see if thats possible. |
|
| Author: | Dr.SteelheadCatcher [ Sat Aug 02, 2014 3:18 pm ] |
| Post subject: | Re: PA rudder control |
On my 2013 PA-14, the answer is no because the handle "nests" into the plastic bracket that also holds the elevated, horizontal aluminum tube. |
|
| Author: | trevore [ Sun Aug 03, 2014 6:54 am ] |
| Post subject: | Re: PA rudder control |
Thanks for looking. |
|
| Author: | Thinwater skinner [ Mon Aug 04, 2014 2:34 pm ] |
| Post subject: | Re: PA rudder control |
trevore wrote: Can anyone tell me if the rudder control handle on a PA can be turned around so that the long end is facing the rear of the boat? I rented one recently and spent some time paddling it. My paddle hung up under the handle several times and just wanted to see if thats possible. If you buy or rent a PA 14, ask for the longer paddle. The PA 14 is very wide and a longer paddle will help get a better reach to each side without have to rock you body from side to side for the reach. Just my 2 Cents worth. Good Luck |
|
| Author: | trevore [ Mon Aug 04, 2014 3:11 pm ] |
| Post subject: | Re: PA rudder control |
Will definitely do that. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|