Hobie Forums http://www.hobie.com/au/en/forums/ |
|
Repair / replace? http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=52885 |
Page 1 of 1 |
Author: | pa14naz [ Sat Sep 13, 2014 8:39 pm ] |
Post subject: | Repair / replace? |
While cleaning the 2012 PA14 today I found a crack(heart broken). Dropped it off at the local dealer. Researching here and other places I have noticed if you are going to have an issues - then this is the area it will happen. Dealer hinted it would be an easy repair, however I am clearly concerned about reliability over time. I asked the dealer to contact Hobie. My warranty expires in Dec 2014. Any advice or concerns with repair vs replace? ![]() |
Author: | Flyfsh [ Sun Sep 14, 2014 6:59 am ] |
Post subject: | Re: Repair / replace? |
Looks easy to get to. I have welded 2 similar cracks ( in different places) in older yaks and both are holding after 2 years. Jim |
Author: | mrfixit1 [ Sun Sep 14, 2014 5:04 pm ] |
Post subject: | Re: Repair / replace? |
This is a common place for the cracks Hobie will replace this if under warranty .My friend had same issues last year his was a 2010 and they replaced his with a pro rate. |
Author: | ezbite [ Sun Sep 14, 2014 6:52 pm ] |
Post subject: | Re: Repair / replace? |
IMO, replace it if its still under warranty. why risk having problems with a repair later down the road on a boat that is no longer under warranty. |
Author: | pa14naz [ Mon Sep 15, 2014 7:40 pm ] |
Post subject: | Re: Repair / replace? |
Thanks for the info. |
Author: | Stealth [ Tue Sep 16, 2014 4:25 am ] |
Post subject: | Re: Repair / replace? |
I'm new to the forum and impressed with my 2014 PA-14 but if I spent all that money and the boat cracked in such a short time I would want it replaced. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |