| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2015 PA 14 questions http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=54431 |
Page 1 of 1 |
| Author: | GetBent [ Mon Apr 13, 2015 7:12 pm ] |
| Post subject: | 2015 PA 14 questions |
The new pa14 has an additional fin to help it track along with the rudder. On my revo i dont worry about dragging it a little because the rudder is on top. Is the pa14 ok to do the same? I was also told by my dealer (which is 3hrs away is why i asked previous question here) that they have 5 already taken pa14s coming in a week and next shipment is mid May. Are all dealers facing the same thing due to the shipping strike. |
|
| Author: | SWFLGamecock [ Sun Apr 19, 2015 8:32 pm ] |
| Post subject: | Re: 2015 PA 14 questions |
The tracking skeg sticks down lower than the hull, so I would recommend retracting it before pulling it out of the water onto land. A trailer might be OK if you have a boat ramp. |
|
| Author: | chllhu [ Mon Apr 20, 2015 1:57 pm ] |
| Post subject: | Re: 2015 PA 14 questions |
The skeg and rudder will make contact with the ground if you drag it even in the up/stowed position. Its best to transport with a Hobie cart. |
|
| Author: | GetBent [ Mon Apr 20, 2015 7:28 pm ] |
| Post subject: | Re: 2015 PA 14 questions |
Thanks for taking the time to answer my questions |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|