72055 KAYAK COVER / PA 14 CUSTOM
Tight custom fit and fully adjustable for Livewell / H-Crate or without. Opening for Power Pole mount. Opening for the bow handle and reinforced bow knuckle if installed while on a cart.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Looking for 14' PA cover http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=54454 |
Page 1 of 2 |
| Author: | Litewings [ Wed Apr 15, 2015 7:58 pm ] |
| Post subject: | Looking for 14' PA cover |
Does anyone make a good cover for the 14' PA? |
|
| Author: | mmiller [ Thu Apr 16, 2015 8:58 am ] |
| Post subject: | Re: Looking for 14' PA cover |
72055 KAYAK COVER / PA 14 CUSTOM Tight custom fit and fully adjustable for Livewell / H-Crate or without. Opening for Power Pole mount. Opening for the bow handle and reinforced bow knuckle if installed while on a cart.
|
|
| Author: | CanB52 [ Fri Apr 17, 2015 10:25 am ] |
| Post subject: | Re: Looking for 14' PA cover |
We just purchased this cover that Matt posted. It is very nice and fits like a glove. Not difficult to put on. Very happy with it |
|
| Author: | Stealth [ Fri Apr 17, 2015 5:13 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
Does the chair stay in place or does it have to be removed for it to fit properly? |
|
| Author: | CanB52 [ Fri Apr 17, 2015 9:26 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
The chair stays in place, we just folded the back forward. |
|
| Author: | Stev0 [ Fri Apr 17, 2015 11:24 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
Lovig also makes nice covers . Gtz |
|
| Author: | nealhobie [ Tue May 26, 2015 6:09 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
I have the original PA 13'8". Will this cover work? |
|
| Author: | SRAces [ Wed May 27, 2015 6:27 am ] |
| Post subject: | Re: Looking for 14' PA cover |
nealhobie wrote: I have the original PA 13'8". Will this cover work? It will work. All PA 14s are the same 13'8" length. |
|
| Author: | Carver [ Wed Apr 20, 2016 1:41 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
Stev0 wrote: Lovig also makes nice covers . Gtz Does Lovig distribute here in the USA? I could not find a retailer. |
|
| Author: | STLKayak [ Wed Apr 20, 2016 10:44 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
It looks like the Lovig cover is cheaper. If I do my calculations right, about $150 US including shipping vs. $220 for Hobie retail. I will say, just looking at the pictures on the Lovig site, the covers are very similar, but the Hovie cover has thee additional snap together straps under the rear handle, as well as a cinch strap to tighten it down. I think from just looking at the photos that the Hobie would trailer better. My Hobie cover trailered fine the two outings I used it. Only plan on trailering with it on for long distance halls, or if I know the weather is going to be bad. The cover is pretty bulky and just one more thing to store, and unlike the Lovig, does not come with a storage bag, unless you count the plastic bag it sold in. I still want find out the purpose of the Bungee on top of the Hobie cover. When I cinch it down, it actually seems to creat more of a pocket for water to pool or collect on the cover. I am sure there is a method to that bungee madness, I just have not figured it out. Mine did not come with any type of manual, just retail sleave that has some info on it, but nothing of detail. |
|
| Author: | Archer444 [ Thu Apr 21, 2016 7:59 am ] |
| Post subject: | Re: Looking for 14' PA cover |
I picked up a 14' jon boat cover from Academy for $45. Works like a charm! |
|
| Author: | mmiller [ Thu Apr 21, 2016 11:09 am ] |
| Post subject: | Re: Looking for 14' PA cover |
STLKayak wrote: I still want find out the purpose of the Bungee on top of the Hobie cover. Has room for a Livewell. Bungee is used when you don't have the well in the boat. |
|
| Author: | STLKayak [ Thu Apr 21, 2016 12:49 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
Archer444 wrote: I picked up a 14' jon boat cover from Academy for $45. Works like a charm! Archer - i really like that idea for transporting and quick covering. I am sure it is pretty small and compact, and goes on and off very easily. Might be a nice addition for short term storage/overnighting, versus the Hobie Cover's longer term near full kayak coverage. Have any pictures and a model number? |
|
| Author: | Grizz [ Sat Jun 04, 2016 6:38 am ] |
| Post subject: | Re: Looking for 14' PA cover |
Can the rudder and skeg be lowered to relieve tension off the lines with this cover installed? |
|
| Author: | firsttimer [ Sat Jun 04, 2016 2:12 pm ] |
| Post subject: | Re: Looking for 14' PA cover |
Just bought and put on a jon boat cover from walmart. It actually fits really well and was on sale for 40$ Sent from my iPhone using Tapatalk |
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|