| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| PA 14 storage upside down question http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=55242 |
Page 1 of 1 |
| Author: | dasher [ Tue Jul 07, 2015 11:56 am ] |
| Post subject: | PA 14 storage upside down question |
I've looked but cannot find the answer. I'm intending to build a storage solution for my PA 14. It is recommended to be (long term) stored upside down but does that mean it should be on the H rails or instead supported with supports before & after the rails? thanks |
|
| Author: | samf58 [ Tue Jul 07, 2015 1:03 pm ] |
| Post subject: | Re: PA 14 storage upside down question |
I store my pa12 upside down all the time I made a pallet to sit it on it sits on the top edges I'll take a picture and post it in the next day or so. Sam |
|
| Author: | Snookmeister [ Tue Jul 07, 2015 4:34 pm ] |
| Post subject: | Re: PA 14 storage upside down question |
I built my cart/storage rack with the PVC rails. Seems to work perfectly, no deformation in the hull at all in my horribly hot garage here in west central Florida. I know it says that in the owners manual, but dang flipping my PA 14 over, SCREW THAT! I just built the height of my truck bed and it slides right in. Within 1 minute it's out of the garage and being strapped in. When I get home, slide it out wash it down, back in the garage. I have a pic of mine on here as do others that have done similar things. viewtopic.php?f=78&t=54428 |
|
| Author: | Old Timer [ Wed Jul 08, 2015 2:42 pm ] |
| Post subject: | Re: PA 14 storage upside down question |
Quote: It is recommended to be (long term) stored upside down but does that mean it should be on the H rails or instead supported with supports before & after the rails? Dasher, where did you read that? I am under the impression that storing them in the Hobie cradles is the recommended long term storage method. |
|
| Author: | Old Timer [ Wed Jul 08, 2015 2:50 pm ] |
| Post subject: | Re: PA 14 storage upside down question |
Oops! I just reread the Manual and saw that upside down is also OK. When in doubt read... |
|
| Author: | basscatlildave [ Thu Jul 09, 2015 9:51 am ] |
| Post subject: | Re: PA 14 storage upside down question |
I'd like to see that too. samf58 wrote: I store my pa12 upside down all the time I made a pallet to sit it on it sits on the top edges I'll take a picture and post it in the next day or so.
Sam |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|