Good chance the RAM X-Grip will do the job:
http://slhobie.com.au/gear/mounts/ram-mounts/351-ram-x-grip
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Any Hobie dealer should have them.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Cell phone mount http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=55942 |
Page 1 of 1 |
| Author: | JRR [ Mon Sep 07, 2015 6:52 pm ] |
| Post subject: | Cell phone mount |
Can anyone recommend a cell phone mount for a Galaxy S4? I'd like to have my phone handy for gps, etc while I'm out there. I want something semi-permanent - no suction cup mounts. Thanks. |
|
| Author: | Yakass [ Mon Sep 07, 2015 10:27 pm ] |
| Post subject: | Re: Cell phone mount |
Good chance the RAM X-Grip will do the job: http://slhobie.com.au/gear/mounts/ram-mounts/351-ram-x-grip Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Any Hobie dealer should have them. |
|
| Author: | NH_HobiePA14 [ Tue Sep 08, 2015 11:11 am ] |
| Post subject: | Re: Cell phone mount |
Yakass wrote: Good chance the RAM X-Grip will do the job: http://slhobie.com.au/gear/mounts/ram-mounts/351-ram-x-grip Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Any Hobie dealer should have them. I agree..I have this in my car and it holds a lot of different phones very securely |
|
| Author: | SteveLIBS [ Tue Sep 08, 2015 2:55 pm ] |
| Post subject: | Re: Cell phone mount |
I like the "steelie mount" system. A steel ball and a magnet with 3M adhesive/tape. I was concerned about the effect of the magnet on the phone at 1st, but mounted the way they specify and I haven't had an issue. It's a whole less restrictive than other 'holders' as it doesn't grip or hold the phone - the magnet does - and it rotates around the steel ball for multiple easy to acheive angles. Just my opinion though. |
|
| Author: | GONE FISHING [ Fri Sep 11, 2015 7:56 am ] |
| Post subject: | Re: Cell phone mount |
SteveLIBS wrote: I like the "steelie mount" system. A steel ball and a magnet with 3M adhesive/tape. I was concerned about the effect of the magnet on the phone at 1st, but mounted the way they specify and I haven't had an issue. It's a whole less restrictive than other 'holders' as it doesn't grip or hold the phone - the magnet does - and it rotates around the steel ball for multiple easy to acheive angles. Just my opinion though. That Steelie system looks cool but I don't think it would handle Saltwater abuse much (don't think it's made for that to be honest) but looks sensational for the car |
|
| Author: | Lt.FireDog [ Mon Sep 14, 2015 10:01 pm ] |
| Post subject: | Re: Cell phone mount |
I use the RAM X-grip for my iphone (Lifeproof cased) on my Outback...just add the RAM Tough-claw to mount on the H-Rail. Saltwater safe. I would suggest a leash on your phone as no phone holder is indestructible.  http://www.ebay.com/itm/like/3017340282 ... ps&lpid=82 
|
|
| Author: | KILO [ Mon Sep 28, 2015 2:40 am ] |
| Post subject: | Re: Cell phone mount |
If only the small rubber attachments at each corner would stay put! They fall off easily when removing the phone. Recommend using superglue to make them somewhat permanent! |
|
| Author: | KansasYaker [ Tue Oct 20, 2015 8:50 pm ] |
| Post subject: | Re: Cell phone mount |
I too use the X-Grip for my iPhone but did order this yesterday for $6. Wraps around the back of the X-Grip and then secures the 4 corners of the phone. For $6, I thought it was worth the try. Doesn't arrive until Thursday, so maybe I'll try it out on Friday. Texel WebGrip Security Tether Cradle Support Black http://www.amazon.com/gp/product/B014GW7KJ6?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s03 
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|